Honda Key Fob Still Dead After New Battery

A second wrong thin coin will not revive a Honda smart key molded for CR2032. On a Honda remote, the code stamped on the cell you remove—or molded beside the well—beats any chart.

CR2032

Diameter: 20 mm

Thickness: 3.2 mm

3 V lithium coin — match the stamp in your shell.

The right coin cell for this fob

Most Honda smart keys: CR2032. Many older flip remotes: CR1616. Stamp and molding win over year charts.

Install tips for this Honda remote

  1. Confirm this guide matches your situation before you buy a cell.
  2. Open the Honda shell the way this generation opens.
  3. Photograph the plus face; read the stamped code.
  4. Fit one matching lithium coin—never stacked.
  5. Close every clip; test lock/unlock outside.

Keep the job narrow

If a Honda fob stays dead after a new battery, recheck CR1616 vs CR2032, polarity, and cover clips. Stay on this issue first; other Honda fob problems belong on their own guides.

Mistakes that waste a trip to the store

Wrong thickness, reversed polarity, a cover that never fully clipped, or a bent contact spring can look like a “dead” Honda key after a fresh coin. A battery-only swap does not wipe pairing.

Other useful Honda fob pages

FAQ

Will a battery-only swap reprogram my Honda?

No—pairing stays on a paired fob.

Which coin do I buy?

The stamped code in your shell.

Is this guide for other car brands?

No—Honda only.

Independent guide. Honda is a trademark of Honda Motor Co., Ltd. This site is not affiliated with, endorsed by, or sponsored by Honda. The code printed on the cell in your fob overrides any chart.

Scroll to Top