Using a CR1616 Instead of a CR2032 in a Honda Fob

If you are searching for “cr1616 instead of cr2032 honda”, start with the stamped code on the coin cell already inside the fob. That stamp beats a generic year chart.

A CR1616 instead of a CR2032 in a Honda smart fob is too small. It will rattle or sit off to the side and the fob will act dead.

What battery this Honda fob needs

Battery to buy a CR2032 for the smart-key cup
Fob you are likely holding a push-button Honda smart fob

Swap steps that usually work

The swap is tempting when a junk drawer already has the thinner cell from an older Civic.

When a new battery still fails

Diameter and thickness are both wrong. No amount of tape around the edge makes a proper contact. Put the CR1616 back in the flip key it came from. Buy a CR2032 for the smart fob.

CR2032, CR2025, and CR1616 drawn at relative diameter CR2032 20 mm · 3.2 mm CR2025 20 mm · 2.5 mm CR1616 16 mm · 1.6 mm
Same drawing scale: CR2032 and CR2025 share a 20 mm diameter and do not share a thickness. CR1616 is the smaller disc.

Related how-to pages

FAQ

What should you buy for this a push-button Honda smart fob?

a CR2032 for the smart-key cup. The stamp in that shell outranks the listing title.

What is the mistake behind “cr1616 instead of cr2032 honda”?

Diameter and thickness are both wrong. No amount of tape around the edge makes a proper contact.

Honda is a trademark of Honda Motor Co., Ltd. Honda Key Fob Battery is an independent guide and is not affiliated with, endorsed by, or sponsored by Honda. The code printed on the cell already in your fob overrides any chart. A fob bought later, or a car sold in another country, can use a different shell.

Independent guide. Honda is a trademark of Honda Motor Co., Ltd. This site is not affiliated with, endorsed by, or sponsored by Honda. The code printed on the cell in your fob overrides any chart.

Scroll to Top