Corrosion in a Honda Key Fob

If you are searching for “corrosion in honda key fob”, start with the stamped code on the coin cell already inside the fob. That stamp beats a generic year chart.

Corrosion in a Honda key fob is the aftermath of a leaking or sweating cell, or of water that sat in the cup.

Start with the stamped code

Battery to buy a new cell after the contacts are clean
Fob you are likely holding a fob with green or white crust in the cup

Swap steps that usually work

Scrape gently with a dry swab. If the spring finger flakes apart, the fob is done as a battery job.

When a new battery still fails

Do not pour contact cleaner through the shell so it wicks under the board. A clean cup and one new stamped cell is the whole experiment. More corrosion after that means the shell is no longer weather-tight.

Related how-to pages

Frequently asked questions

What should you buy for this a fob with green or white crust in the cup?

a new cell after the contacts are clean. The stamp in that shell outranks the listing title.

What is the mistake behind “corrosion in honda key fob”?

Do not pour contact cleaner through the shell so it wicks under the board.

Honda is a trademark of Honda Motor Co., Ltd. Honda Key Fob Battery is an independent guide and is not affiliated with, endorsed by, or sponsored by Honda. The code printed on the cell already in your fob overrides any chart. A fob bought later, or a car sold in another country, can use a different shell.

Independent guide. Honda is a trademark of Honda Motor Co., Ltd. This site is not affiliated with, endorsed by, or sponsored by Honda. The code printed on the cell in your fob overrides any chart.

Scroll to Top